Android cell phone batteries: Set a Charging Limit on your Android Device to Avoid Excess Battery Wear
There’s a lot of disagreeing information out there when it comes to the best behavior for charging a phone battery, lithium ion battery start to lose their ability to hold a phone charger over time, and the two biggest factors that contribute to this are excess heat stroke and overcharging.
The act of charging your phone’s battery causes avoid contributes to reduced phone batter capacity over time. To be more specific, ResearchGate found that charging a phone battery to only 85% found a longer phone battery life than charging to full 100%. This is not even getting into the whole Samsung Galaxy Note 7 explode battery failure- which by the way, Samsung once tried to measures by issuing an update that limited the phone’s battery to 60%.
Knowing that charging to a full 100% isn’t the best practice for long-term battery life, for avoid excess batter wear a root app that allows you choose your own charging limit. First you need to check your device isn’t compatible with all devices, but if it works for yours, you can simply set a percentage, then your phone will automatically stop charging once in hits that threshold.
So, how to set a charging limit on your Android device to avoid Excess battery wear for that follow the below steps:
Step 1: Check if this Mod will work on your Android Device
First, you’ll need to make sure this app will work with your particular device. For that, start by plugging your phone into a Portable phone charger. From there, open your favourite root file browser, and then navigate to the /sys/class/power_supply/battery folder. Next, open the charging_enabled file with a text editor, delete the number 1, and then replace it with the number 0. When you are done there, save the file.
At this moment, your phone should stop charging, so go to your battery menu to verify. If the device continues to charge, it’s not compatible with this app.
When you’re done with this quick test, ensure to restart your phone. This will reset the number in the charging_enabled file back to 1.
Step 2: Install Battery Charge limit on your Android device
If you getting that your phone is compatible, it’s time to install the app. For do that, take the APK from the following link, and then tap the download complete notification and Install.
Download: Battery Charge Limit.apk
Step 3: Set a Battery Charge Threshold on your Android Device
- Open the App on Android device.
- Then click on the “Change” button next to the Limit entry. In that you can set the limit in a percentage between 50 and 95,
- At last, press the “Apply” button.
- At the top of the screen, toggle the enable switch, then the Battery Charge Limit app will ask for Superuser access, so on the popup click “Grant”. When you’re finished there, you’re all set to head.
Step 4: Enjoy a Healthier Battery
From now on, whenever you connect your phone to a phone charger, you’ll see an ongoing notification from battery charge Limit. This is the only time the app runs in the background, so it doesn’t have any impact on battery life. Then, once your battery hits the desired threshold, changing will immediately stop.
Until the battery level falls by 3% the app will keep the device from charging, at which moment it will temporarily allow charging again, and then it will repeat same cycle. Ultimately, this method should guide to healthier and longer-lasting battery life.